MegaRAC Development Kit for the AST2600 BMC

For BMC firmware training and development with MegaRAC Community Edition

Deliver faster. Deliver experience.Deliver confidence.

The MegaRAC Development Kit for the AST2600 BMC features hardware, tutorials, and access to MegaRAC firmware to help developers and engineers gain experience in sensor porting, management technologies such as Serial Over LAN (SOL) and UART, and virtual media (vMedia). This kit allows customers to begin immediate development and training projects using the MegaRAC Community Edition BMC Firmware with the AST2600 BMC from ASPEED Technology.

Bundled Hardware

  • AST2600 Evaluation Board (EVB)
  • Fan
  • AMI Series 997 Sensor Board
  • Host system

Tutorials

  • Firmware & AMI DevNet Installation and environment preparation
  • Projects to gain development experience:
    • Sensor porting
    • Management technologies (SOL, UART, etc.) and vMedia

Materials Needed

  • SD or USB storage for virtual media
  • Ethernet, serial and/or display cable(s)
Order Your Kit Today

Hardware Included in This Kit

The AMI Series 997 Sensor Board is designed to mimic the sensors that are typically found on data center server platforms. It allows developers to get started immediately using MegaRAC Community Edition BMC firmware on the AST2600 BMC, for valuable hands-on experience in sensor porting, management and vMedia.

Voltage & Power Meter
  • 2x Current/voltage sensors (INA219A) for 12V and 5V DC power monitoring
  • 2x Drive facing connectors for NVMe/SAS/SATA (SFF-8639 U.2 Slot; U.3 compatible)
  • 2x Host facing connectors for U.2/U.3 NVMe (x4 OCulink)
  • 2x Host facing connectors for SATA/SAS (standard 7-pin SATA)
  • 1x Backplane Controller (AMI MG9100) UBM/VPP/SGPIO host protocol for drive, LED and BMC management
Interface
  • 1x NVMe I²C management interface (accessible via pin header)
  • 1x 2-Channel I²C MUX with Interrupt (PCA9543A)
  • 2x Temperature sensors (TM75AID)
  • 1x 16K Bit EEPROM (24LC16B)
  • 1x 2-to-1 I²C master de-multiplexer with an arbiter function (PCA9641)
  • 1x I²C repeater (PCA9617)
  • 1x Parallel-in/serial-out (74LV165A) with 8 position DIP switch
LED Display
  • 2x Serial-in/parallel-out (74LV595A) with 7 segment LED display
  • 2x Potentiometers for +12V, +5V voltage monitoring (to BMC ADC input)
  • 1x 2-channel +12V DC FAN control (PWM)/monitoring (TACHO)
  • Signals are available via pin headers for composing desired I²C topologies
  • 4 GPIO controlled LEDs
  • 4 Digital input implementation with 4pcs tactile switches

For More Information

Check out related MegaRAC Data Sheets

MegaRAC AST2600 Development Kit

MegaRAC OneTree

MegaRAC GPGPU Accelerator Pack

MegaRAC CM‑X

MegaRAC GitSPX

MegaRAC SP‑X

MegaRAC AST2600 Development Kit (Simplified Chinese)

MegaRAC AST2600 Development Kit (Traditional Chinese)

Get to Know AMI

Support Links for Developers

Customer Portal

Visit AMI’s Customer Portal for security advisories and other announcements. For assistance with access issues, please contact your AMI Sales Representative.

Access Customer Portal

Support Portal

Visit AMI’s Engineering Information Portal (EIP) for detailed technical support. For assistance with access issues, please contact your AMI Sales Representative.

Access EIP

Training Services

AMI offers custom training at customer sites and AMI offices worldwide. Courses are designed around customers’ current projects for maximum effectiveness. Contact us to learn more.

Contact Us

Technical Support

Support services from AMI are dependent on your sales agreement. Please contact your AMI Sales Representative.

Contact Us

DOWNLOAD LICENSE AGREEMENT

NOTICE SPECIFIC TO SOFTWARE AVAILABLE ON THIS WEBSITE (ami.com) OR ANY OTHER AMI OWNED, OPERATED, LICENSED OR CONTROLLED SITE

 Any software that is made available to download from this server ("Software") is the copyrighted work of AMI and/or its suppliers. Use of the Software is governed by the terms of the end user license agreement, if any, which accompanies or is included with the Software ("License Agreement"). An end user will be unable to install any Software that is accompanied by or includes a License Agreement, unless he or she first agrees to the License Agreement terms.

 The Software is made available for downloading solely for use by end users according to the License Agreement. Any reproduction or redistribution of the Software not in accordance with the License Agreement is expressly prohibited by law and may result in severe civil and criminal penalties. Violators will be prosecuted to the maximum extent possible.

 WITHOUT LIMITING THE FOREGOING, COPYING OR REPRODUCTION OF THE SOFTWARE TO ANY OTHER SERVER OR LOCATION FOR FURTHER REPRODUCTION OR REDISTRIBUTION IS EXPRESSLY PROHIBITED, UNLESS SUCH REPRODUCTION OR REDISTRIBUTION IS EXPRESSLY PERMITTED BY THE LICENSE AGREEMENT ACCOMPANYING SUCH SOFTWARE.

 THE SOFTWARE IS WARRANTED, IF AT ALL, ONLY ACCORDING TO THE TERMS OF THE LICENSE AGREEMENT. EXCEPT AS WARRANTED IN THE LICENSE AGREEMENT, AMI HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH REGARD TO THE SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT.

 FOR YOUR CONVENIENCE, AMI MAY MAKE AVAILABLE ON THIS SERVICE OR IN ITS SOFTWARE PRODUCTS, TOOLS AND UTILITIES FOR USE AND/OR DOWNLOAD. AMI DOES NOT MAKE ANY ASSURANCES WITH REGARD TO THE ACCURACY OF THE RESULTS OR OUTPUT THAT DERIVES FROM SUCH USE OF ANY SUCH TOOLS AND UTILITIES. PLEASE RESPECT THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS WHEN USING THE TOOLS AND UTILITIES MADE AVAILABLE ON THIS SERVICE OR IN AMI SOFTWARE PRODUCTS.

 RESTRICTED RIGHTS LEGEND. Any Software which is downloaded from this Server (ami.com) any other AMI owned, operated, licensed or controlled site for or on behalf of the United States of America, its agencies and/or instrumentalities ("U.S. Government"), is provided with Restricted Rights. Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 or subparagraphs (c)(1) and (2) of the Commercial Computer Software - Restricted Rights at 48 CFR 52.227-19, as applicable. Manufacturer is AMI 3095 Satellite Boulevard, Building 800, Suite 425, Duluth, GA 30096.

NOTICE SPECIFIC TO DOCUMENTS AVAILABLE ON THIS WEBSITE

 Permission to use Documents (such as white papers, press releases, datasheets and FAQs) from this server (ami.com) any other AMI owned, operated, licensed or controlled site ("Server") is granted, provided that (1) the below copyright notice appears in all copies and that both the copyright notice and this permission notice appear, (2) use of such Documents from this Server is for informational and non-commercial or personal use only and will not be copied or posted on any network computer or broadcast in any media and (3) no modifications of any Documents are made. Educational institutions ( specifically K-12, universities and state community colleges) may download and reproduce the Documents for distribution in the classroom. Distribution outside the classroom requires express written permission. Use for any other purpose is expressly prohibited by law and may result in severe civil and criminal penalties. Violators will be prosecuted to the maximum extent possible.

 Documents specified above do not include the design or layout of the ami.com website or any other AMI owned, operated, licensed or controlled site. Elements of AMI websites are protected by trade dress, trademark, unfair competition and other laws and may not be copied or imitated in whole or in part. No logo, graphic, sound or image from any AMI website may be copied or retransmitted unless expressly permitted by AMI.

 AMI AND/OR ITS RESPECTIVE SUPPLIERS MAKE NO REPRESENTATIONS ABOUT THE SUITABILITY OF THE INFORMATION CONTAINED IN THE DOCUMENTS AND RELATED GRAPHICS PUBLISHED ON THIS SERVER FOR ANY PURPOSE. ALL SUCH DOCUMENTS AND RELATED GRAPHICS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. AMI AND/OR ITS RESPECTIVE SUPPLIERS HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH REGARD TO THIS INFORMATION, INCLUDING ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL AMI AND/OR ITS RESPECTIVE SUPPLIERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF INFORMATION AVAILABLE FROM THIS SERVER.

 THE DOCUMENTS AND RELATED GRAPHICS PUBLISHED ON THIS SERVER COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN. AMI AND/OR ITS RESPECTIVE SUPPLIERS MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED HEREIN AT ANY TIME.

NOTICES AND PROCEDURE FOR MAKING CLAIMS OF COPYRIGHT INFRINGEMENT

 Pursuant to Title 17, United States Code, Section 512(c)(2), notifications of claimed copyright infringement should be sent to Service Provider's Designated Agent. ALL INQUIRIES NOT RELEVANT TO THE FOLLOWING PROCEDURE WILL NOT RECEIVE A RESPONSE.

 See Notice and Procedure for Making Claims of Copyright Infringement.

LINKS TO THIRD PARTY SITES

 THE LINKS IN THIS AREA WILL LET YOU LEAVE AMI'S SITE. THE LINKED SITES ARE NOT UNDER THE CONTROL OF AMI AND AMI IS NOT RESPONSIBLE FOR THE CONTENTS OF ANY LINKED SITE OR ANY LINK CONTAINED IN A LINKED SITE, OR ANY CHANGES OR UPDATES TO SUCH SITES. AMI IS NOT RESPONSIBLE FOR WEBCASTING OR ANY OTHER FORM OF TRANSMISSION RECEIVED FROM ANY LINKED SITE. AMI IS PROVIDING THESE LINKS TO YOU ONLY AS A CONVENIENCE, AND THE INCLUSION OF ANY LINK DOES NOT IMPLY ENDORSEMENT BY AMI OF THE SITE.

UNSOLICITED IDEA SUBMISSION POLICY

 Neither AMI, nor its employees, agents and/or subsidiaries, shall accept or consider unsolicited ideas, including but not limited to ideas for new advertising campaigns, new promotions, new products or technologies, processes, materials, marketing plans or new product names. Submission of any original creative artwork, samples, demos, or other works to AMI is expressly prohibited. In the event a submission including unsolicited materials of any nature is received by AMI, said submission shall be destroyed and AMI shall not be liable for any direct or consequential damages suffered by the sender, nor shall AMI be under any obligation to treat such material as confidential or proprietary. It is expressly understood that the rationale for AMI's policy on unsolicited idea submission is to prevent a third party from making a claim of infringement against AMI on the basis of an idea, product, or other material that is developed by AMI, that may be similar to or the same as an idea, product, or other material contained in an unsolicited submission that may have been submitted to and/or received by AMI.

FEEDBACK AND INFORMATION

 ANY FEEDBACK YOU PROVIDE AT THIS SITE SHALL BE DEEMED TO BE NON-CONFIDENTIAL. AMI IS FREE TO USE SUCH INFORMATION ON AN UNRESTRICTED BASIS.

Terms & Conditions