Home  »  Support  »  AMIDebug Rx Product Support

AMIDebug Rx Product Support

All downloads and documents for the AMIDebug Rx are listed below. If you cannot find what you are looking for please contact tech support.

Firmware

Version: AMI Debug Rx Firmware v2.3.6

Date: 7/14/2010

Note: Please refer to the AMI Debug Rx User Manual for firmware upgrade instructions

Version: AMI Debug Rx Firmware v2.3.4

Date: 4/5/2010

Note: Please refer to the AMI Debug Rx User Manual for firmware upgrade instructions

Version: AMI Debug Rx Firmware v2.3.2

Date: 2/1/2010

Readme: readme.txt

Note: Please refer to the AMI Debug Rx User Manual for firmware upgrade instructions

Miscellaneous Files

Version: AMI Debug Rx Supplemental Files (v2.3.6)

Date: 7/14/2010

Note: Contains user manual, release notes, firmware and OS drivers

Version: AMI Debug Rx Supplemental Files (v2.3.4)

Date: 4/5/2010

Readme: readme.txt

Note: Contains user manual, release notes, firmware and OS drivers

Version: AMI Debug Rx Supplemental Files (v2.3.2)

Date: 2/1/2010

Readme: readme.txt

Note: Contains user manual, release notes, firmware and OS drivers

Document Library

Knowledgebase Items

( 382 )

 What is AMI Debug Rx?

( 383 )

 Can AMI Debug Rx get checkpoints from any PC?

( 384 )

 Is AMI Debug Rx the same as a PCI checkpoint card?

( 385 )

 How do I use AMI Debug Rx in Checkpoint Mode?

( 386 )

 What is the difference between CHECKPOINT and DEBUG modes on the OPTION SWITCH?

( 387 )

 I see numbers on the AMI Debug Rx screen, but what do they mean?

( 388 )

 I want to save this checkpoint data and look at it later. How do I save the session?

( 389 )

 How do I review a saved session?

( 390 )

 How do I clear the AMI Debug Rx checkpoint session and start with a blank session?

( 391 )

 What is VCOM?

( 392 )

 What OS will VCOM work under?

( 393 )

 How do I locate the USB Debug Port?

( 394 )

 How does AMI Debug Rx get power?

( 395 )

 I don’t see any checkpoint data when I turn on my computer. How do I make sure AMI Debug Rx is setup properly for checkpoints?

( 396 )

 AMI Debug Rx displays checkpoint strings, but they don’t match the BIOS properly. How do I make AMI Debug Rx select the correct string table?

( 397 )

 My AMI Debug Rx checkpoint strings are blank or produce garbage characters. How do I fix the checkpoint strings?

( 398 )

 Can I use a USB Hub with AMI Debug Rx?

( 399 )

 Will XMODEM work with VCOM and HyperTerminal in Microsoft Windows?

( 400 )

 How do I make Ayera TeraTerm find the COM port used by the AMI Debug Rx VCOM port?

( 401 )

 The OPTION MODE switch has a position between the DEBUG and CHECKPOINT setting, but it’s not labeled. What does the middle position do?
s i t e   m a p
i n t e r n a t i o n a l   o f f i c e s
   
Copyright © 1985 - 2013 American Megatrends Inc. - All rights reserved.
American Megatrends, Inc., 5555 Oakbrook Parkway, Building 200, Norcross, Georgia 30093, USA.
 All trademarks and trade names used on this website refer to either the entities claiming the marks and names or their
products. American Megatrends, Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
Click here for more information about AMI Copyright, Trademarks and Trade Names.